If you are looking for the ultimate enclosure for TDMA, CDMA, AMPS, PCS, GMS, P2T, PDA, and other wireless communications devices the STE3800 is the enclosure for you. The STE3800 is configured with a built-in Ramsey RTF Radiating Test Fixture to give you flawless go/no-go testing with guaranteed repeatability.
It is designed around the STE3300 to give you a whopping 5½”H x 15¼”W x 9¼”D inside working space. The RTF provides a broadband coupling response from 800 MHz all the way up to 8 GHz. The heavy duty universal clamp system positions and holds the device under test in an exact position that can easily be duplicated for repeatability. Because frequent tests require the operator to visually inspect the device display (cell phone, PCS phone, etc.), the STE3800 features a large RF tight viewing window that overlooks the entire working area. The entire display and any indicators, LED's etc. located on the device can easily be seen throughout the test process!
Double thickness 24dB RF absorbent foam lines the entire work area for a flat response. As with the STE3300, double row RF gaskets are used to provide RF isolation up to -90dB at 4GHz. A Type-N female connector is provided standard for the RTF antenna connection, and is located on the removable 304 stainless steel I/O panel that can be custom configured with any available I/O options. |
| |
Wireless device testing
|
Perfect for 802.11a, b, g
|
Cellular, PCS, GSM 3G Testing
|
Bluetooth, RFID, ZigBee testing
|
Wide variety of I/O options
|
Super isolation up to 18GHz
|
RF radiating test fixture models for absolute repeatability testing
|
Stock models to fit your custom applications
|
Integral RF radiating test fixture (RTF)
|
Flat Coupling Factor 800MHz - 8 GHz
|
Provides absolute repeatability testing
|
RF tight illuminated viewing window to see device displays and indicators
|
1.1” RF absorbent foam liner for a flatter response
|
Exclusive double lip RF tight gasket
|
Universal I/O connecter interface plate
|
| |
Connectors:
|
Type-N to built-in RTF antenna provided standard
Additional connectors available, see options below |
| |
Isolation:
|
-90dB @ 2GHz
|
-90dB @ 4GHz
|
-80dB @ 6GHz
|
| |
Custom Configuration Options: (Call 888-345-8766 for a quote today)
|
RF Feedthrough
BNC, TNC, SMA, SMB, UHF, Type-N |
Fiber Optic
Fiber optic bulkhead feedthrough |
Dust Covers
Dust cover caps with security chains available for all RF feedthrough connectors |
RF Filtered Data
DB9 (100pF), DB9 (1000pF), DB15 (820pF), DB15 (1000pF), DB25 (1000pF), DB37 (1000pF), RJ45/DB9 Filtered, RJ11/DB9 Filtered, USB/DB9 Filtered |
Power Connections
4-Pole filtered power strip, 6-Pole filtered power strip, surge protected power strips |
Ventilation Options
Dual side mounted RF filtered vents with single filtered exhaust muffin fan |
RF Safety Inhibit Option
Provides RF relay to automatically switch circuit to internal load when cover is opened |
RF Absorbent Foam
Standard ½" thick RF absorbent foam liner provides 24dB attenuation |
Fiber Transceiver
Opticom USB 2.0 Fiber Transceiver System available for devices up to 480 Mb/s. |
| |
|
