Designed specifically for Wireless Communications circuit board production testing where there is a need for a large footprint for isolating oversized boards and minimal height to allow for easy device placement. The lid opens automatically using the internally mounted dual precision air pistons once the dual heavy duty latches are released.
Construction meets the same standards as our popular STE3300 and incorporates the same double gasketed lid to provide the highest attenuation factor at the best value. The I/O panel is located close to the bottom of the rear panel to keep the cabling as close to the device under test as possible. All connectors are milled into a removable 304 stainless steel panel to allow for future requirements when needed. |
| |
Features:
|
Wireless device testing
|
Perfect for 802.11a, b, g
|
Cellular, PCS, GSM 3G Testing
|
Bluetooth, RFID, ZigBee testing
|
Wide variety of I/O options
|
Super isolation up to 18GHz
|
RF radiating test fixture models for absolute repeatability testing
|
Stock models to fit your custom applications
|
RF absorbent foam liner
|
Exclusive double lip RF tight gasket
|
Universal I/O connector interface plate
|
Easy release latch system
|
Dual gas filled cover struts
|
Designed to test complete systems
|
| |
Connectors:
|
None provided standard
Custom configured, see options below |
| |
Isolation:
|
-90dB @ 2GHz
|
-90dB @ 4GHz
|
-80dB @ 6GHz
|
| |
Custom Configuration Options: (Call 888-345-8766 for a quote today)
|
RF Feedthrough
BNC, TNC, SMA, SMB, UHF, Type-N |
Fiber Optic
Fiber optic bulkhead feedthrough |
Dust Covers
Dust cover caps with security chains available for all RF feedthrough connectors |
RF Filtered Data
DB9 (100pF), DB9 (1000pF), DB15 (820pF), DB15 (1000pF), DB25 (1000pF), DB37 (1000pF), RJ45/DB9 Filtered, RJ11/DB9 Filtered, USB/DB9 Filtered |
Power Connections
4-Pole filtered power strip, 6-Pole filtered power strip, surge protected power strips |
Ventilation Options
Dual side mounted RF filtered vents with single filtered exhaust muffin fan |
RF Safety Inhibit Option
Provides RF relay to automatically switch circuit to internal load when cover is opened |
RF Absorbent Foam
Standard ½" thick RF absorbent foam liner provides 24dB attenuation |
Fiber Transceiver
Opticom USB 2.0 Fiber Transceiver System available for devices up to 480 Mb/s |
| |
|
