Product Overview |
| The RF Test Enclosure that started it all! How do you troubleshoot, tune, align and test a device in an RF free environment? Well, up until now you had to invest in a very expensive RF screen room. Our patented STE3000B brought that technology right down to your bench, and the cost all the way down to affordable! The STE3000B is constructed of .090 Aluminum, utilizing precision machined tolerances throughout to maintain an RF-Tight environment. Our special "double lip" technology gives you an RF isolation greater than 90dB down at 1GHz! The heavy duty RF sealed cover hinges open and close with a precision air piston. Once closed, a large RF tight viewing window overlooks the entire working area within the enclosure. Hands-on troubleshooting, tuning and access to the device under test are accomplished using specially designed, silver impregnated, ultra fine mesh gloves that offer excellent manual dexterity and hands-on access to the equipment under test. The entire interior is lined with RF absorbent foam that provides 24dB attenuation. The work area has built-in illumination via two low voltage incandescent lamps powered by the RF Filtered AC Supply. All of the I/O connections and interfaces are provided within a precision machined I/O panel. This panel can be configured with your own custom connector and interface options without affecting the integrity of the enclosure itself. It also allows your enclosure to be "custom configured" from a standard stock enclosure. For you that means speedy delivery and lower costs! Simply choose your I/O's and options from the list provided below and your enclosure will be configured to your spec! Sounds too good to be true? We thought so too; that's why we have a patent on it! |
 |
|
Specifications |
| Length | 12.00 in. (304.8mm) | | Length (Inside) | 10.50 in. (266.7mm) | | Width (Inside) | 17.00 in. (431.8mm) | | Width | 18.00 in. (457.2mm) | | Height | 12.75 in. (323.9mm) | | Height (Inside) | 8.00 in. (203.2mm) |
|
|
|
Photos |
|
|
|
Detailed Information |
| The RF Test Enclosure that started it all! How do you troubleshoot, tune, align and test a device in an RF free environment? Well, up until now you had to invest in a very expensive RF screen room. Our patented STE3000B brought that technology right down to your bench, and the cost all the way down to affordable! The STE3000B is constructed of .090 Aluminum, utilizing precision machined tolerances throughout to maintain an RF-Tight environment. Our special "double lip" technology gives you an RF isolation greater than 90dB down at 1GHz! The heavy duty RF sealed cover hinges open and close with a precision air piston. Once closed, a large RF tight viewing window overlooks the entire working area within the enclosure. Hands-on troubleshooting, tuning and access to the device under test are accomplished using specially designed, silver impregnated, ultra fine mesh gloves that offer excellent manual dexterity and hands-on access to the equipment under test. The entire interior is lined with RF absorbent foam that provides 24dB attenuation. The work area has built-in illumination via two low voltage incandescent lamps powered by the RF Filtered AC Supply. All of the I/O connections and interfaces are provided within a precision machined I/O panel. This panel can be configured with your own custom connector and interface options without affecting the integrity of the enclosure itself. It also allows your enclosure to be "custom configured" from a standard stock enclosure. For you that means speedy delivery and lower costs! Simply choose your I/O's and options from the list provided below and your enclosure will be configured to your spec! Sounds too good to be true? We thought so too; that's why we have a patent on it! |
| | Features:
| Wireless device testing
| Perfect for 802.11a, b, g
| Bluetooth, RFID, 3G testing
| Wide variety of I/O options
| Super isolation up to 18GHz
| Stock models to fit your custom applications
| RF absorbent foam liner
| Exclusive double lip RF tight gasket
| Universal I/O connector interface plate
| RF tight "hands-on" silver mesh gloves
| RF tight illuminated viewing window
| Gas filled cover strut
| Designed for hands-on adjustment and alignment of devices
| | | Connectors:
| None provided standard
Custom configured, see options below. | | | Isolation:
| -90dB @ 1GHz
| -90dB @ 3GHz
| -80dB @ 6GHz
| | | Custom Configuration Options: (Call 888-345-8766 for a quote today)
| RF Feedthrough
BNC, TNC, SMA, SMB, UHF, Type-N | RF Filtered Data
DB9 (100pF), DB9 (1000pF), DB15 (820pF), DB15 (1000pF), DB25 (1000pF), DB37 (1000pF), RJ45/DB9 Filtered, RJ11/DB9 Filtered, USB/DB9 Filtered | Power Connections
4-Pole filtered power strip, 6-Pole filtered power strip, surge protected power strips | Ventilation Options
Dual side mounted RF filtered DC muffin fans | RF Safety Inhibit Option
Provides RF relay to automatically switch circuit to internal load when cover is opened | RF Absorbent Foam
Standard RF absorbent foam liner provides 24dB attenuation. |
| |
|
|
| |
|
|
Related Keywords |
|
|
|
|
| |
|
